Porsche Piwis Tester II

4/02/2019

Free Download VXDIAG Porsche PIWIS III 38.250.000

Free download VXDIAG Porsche PIWIS 3 software latest version 38.250.000:

https://mega.nz/#F!GZ401QjJ!mVbAaQM0e_7t1Ok1HOpXZA

Date: 02-04-2018
Version: 38.250.000

Password: No

Activation: unknown

Expiration: unknown

Image: piwis 38.250.000

Security: unknown! it’s your own risk!

To use with relief,

You’d better use a tested version Piwis 37.900 for Porsche diagnostics and programming

Piwis v37 has a good success with VXDIAG Porsche diagnostic tool

Good at maintenance, repair, control units change and programming & setting codes

New Piws 3 operation system and more intuitive diagnostic interface as Piwis III

VCX-DoIP Piws 3 Interface For Porsche post-2017 vehicles with DoIP diagnosis

VCX-DoIP J2534 Piws 3 VCI look for maintenance wiring diagram

VCX-DoIP Piws 3 login for online immobilizer programming

VCX-DoIP j2534 Piws 3 PST3 Interface support special functions like modification or flashing, with Engineering mode (Development version)

Developer mode enabled

Worked with new and old Porsche vehicles!

New & Old Cars:
All Porsche from 1998-2018:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera

Especially the latest models:
Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018
and other old models

VXDIAG Piwis 3 images:

source: http://www.obdii365.com/wholesale/vxdiag-vcx-doip-porsche-piwis-iii.html

3/18/2019

Possible to use Porsche PIWIS 3 on VAS6154 head?

Look here: How to use VAS6154 head with Porsche PIWIS 3

project PIWIS3 PT3G => VAS6154-Kolun a
look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch
, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 3.0.2.807 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154

Note: please be careful and do it on your own risk.
obdii365.com will not give support

Contributor: ibi1961

Update: Unless you find the 08 firmware
The picture below is VAS 6154

VERY IMPORTANT:

For sake of security, you’re advised to use odis with vas6154 and use piwis with porsche tester 3

with relief!

look here: http://blog.obdii365.com/2018/08/23/vxdiag-porsche-piwis-3-v37-250-020-confirmed-working/

Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche

Diagnostic test: passed

Coding: passed

Programming: passed

look here: http://blog.obdii365.com/2019/02/22/vas-6154-driver-install-usb-wifi-setup-reviews/

attached vas6154 driver download, installation instruction, wlan setup….

3/13/2019

Should I use Porsche PET 2 V8.0 instead of PET 7.3?

Free download PET 2 – Porsche Elektronischer Teilekatalog / Porsche Electronic Parts Catalogue:

[DOWNLOAD]

http://share-links.biz/_bedplmpuamnb/

[PREMIUM]

http://tinyurl.com/XTR3M3DL

[PASSWORD]

XTR3M3

Version:
This is a full version of the Original Porsche Electronic Parts Catalogue

Language:The setup is in German, but after the installation the parts catalogue can easily be changed to English and other languages.

Operating system:

Windows 7/8/10 32Bit/64Bit System

you can install native or virtual [VM]

PET 2 Installation Instructions:
1. Download all .rar Files, extract it and start PET2_2019-XTR.exe
Password for archive/download (not for Installation): XTR3M3
The Installation Wizard will guide you through the installation.
2. Password for Installation (not for archive): XTR3M3@PET_2-Q1/2019

What is PET2:

PET2 is the Porsche electronic parts catalo with multi languages. Porsche PET2 covers the newest and fullest information of spare parts including entering VIN number of the machine and carrying out a filtration, defining on VIN model and modeling year and search of application spare parts. Spare Parts Catalog for Porsche Cars PET2 8.0 software no need active.

What is PET2 V8.0:

Electronic spare parts catalogue Porsche contains the full information on spare parts.

The catalogue occupies one CD, it is possible to establish for work with use of CD, or completely on the winchester.

The spare parts catalog Porsche allows to enter VIN number of the machine and carries out a filtration, using it, but thus number of a body is not taken into account, that is the program Porsche will define on VIN model and modelling year (using first 11 symbols VIN), the rest should be chosen independently. It means, that the program Porsche easy digests VIN numbers with thought up last figures that can lead to to mistakes in identification of units.

In the program there is a function of search of application spare parts, she allows to search application of a detail, and also the information concerning to replacements and returnable parts, the information about “fractional” the deputy. At work with the given catalogue, it is necessary to pay special attention to various footnotes and notes, and also if necessary to look in lists of fractional replacements and V, S and P-page more often to not receive a detail which you did not wait. The price-list is delivered separately either on CD, or on several diskettes.

VERY VERY VERY IMPORTANT:

You have to get PET 2 v8.0 on your own. Use Google and search it. It’s YOUR OWN RISK!!!

For catalogue without password/activation and with no expiration, PET 7.3 is your way to go:

http://www.obdii365.com/wholesale/spare-parts-catalog-for-porsche-cars-pet.html

6/26/2018

How to set up Porsche Piwis 18.100 software

Disclaimer: Not my work. Found on mhhauto forum. Just for sharing purpose.

This Image is based on the following acronis image LINK

Made some modifications:

* Win XP tweaks (enable right click on taskbar, enabled win xp start menu etc)
* Win XP activated (no more 3 days left to activate errors)
* Windows XP fully updated from Windows Update
* Uninstalled all Panasonic drivers and other drivers not critical to the system (for making it into universal image)
* Made into universal image (can restore to VM or any laptop compatible with Windows XP)
* Deleted un-necessary files
* Uninstalled POSES and PET (to make download smaller, can re-install them if you wish - refer folder "Hardlock fix for installing PET and POSES")
* changed adobe reader from German to English
* Updated WinRAR
* 100% defragmented image - the image will restore into a single contiguous portion
* Restored Size ~ 17.9 GB (this is excluding pagefile storage)

NOTE: Even though the PIWIS version is shown as 18.150.500, this might only be a 18.100 as some PIWIS experts on another forum have debunked the existence of 18.150.500 and stated that in this image simply registry edited to display the version as 18.150.500 (refer file "18.150.500 is fake" in the archive)

Installation overview:

1. Boot the recovery CD (in the archive)
2. Restore Image
3. Install / restore drivers (if restoring to a VM, install guest additions)
4. Perform Imprint
5. Done

All detailed step-by-step instructions are in the archive (in folder "README").

Theoretically this image should be able to restore and boot into any laptop which supports Windows XP (hopefully no BSOD on booting). Also you can restore it to a Virtual Machine

My aim with this image was to create an PIWIS image that anyone can restore and use without any difficulty.
This image might be more suited to someone restoring it to a laptop other than a Panasonic CF-30 as I have removed all the Panasonic drivers. You can restore it to a CF-30, just need to reinstall / restore all the drivers

Easiest method to re-install drivers - In the laptop you are planning to restore the image -> If you are already running Win XP in that laptop, use software called "Double Driver" to backup all the drivers. After restoring the PIWIS image, restore the drivers - hardly take 5-10 min for complete driver restore and it's all one-click operation.

--------------------------------------------------------------------------------------------

Restore to VM - here is how I usually do it:

1. Create two virtual hard drives - lets say - VHD-A and VHD-B;

VHD-A will be the main VHD of your VM into which you are restoring the image.
VHD-B is just a temporary VHD to hold the image file for restore

2. Copy the image file (.adi file) into VHD-B
3. Attach both VHD-A and VHD-B to the VM
4. In the VMs CD drive, mount the recovery disc iso
5. Start the VM and boot into the recovery CD
6. Follow the instructions given in the archive to restore the image
7. After image finish restoring, turn off the VM and detach VHD-B and unmount the recovery disc iso from the VM
8. Start the VM - after it finish initializing, install guest additions.
9. Done - you can delete VHD-B from your system

Link attached:

https://mega.nz/#F!XvhhTQpb!qzZn4vSeYeFx8K13SZLAWQ


Rar Archives MD5
-----------------

Part 1   - 7C936553A73B75639F88EBABA96F2F0C
Part 2   - A8DDA2C9773E71C7340BF48BA077501B
Part 3   - 612D64136972570B345C5483008A2395
Part 4   - 436A8762B7A49CEFE2BCD9CE50C53FD4
Part 5   - 23CB220A8E44E405F6FCC49830B512B3
Part 6   - E35AD19B6AC17E5BC4C130029A417AEB
Part 7   - 889DD8C1E3C660D58984E9D06F3E09BE
Part 8   - 7968493EB6A5E72D723E6E236CDAFF9B
Part 9   - EEB2558774F18006AADAB28F906CA426
Part 10  - 2290ABED24E214D2DD10505FE4059726
Part 11  - D3BD9257E56A424EA63153415ABC31E1
Part 12  - A474C378EF06CAA7A41F3EA17F2212B0
Part 13  - 9945E99DA5D6866ACF78D44069311138
Part 14  - 41639ED7FB9B1C3AC99D1A967B41EC98
Part 15  - 1B319BB22FC5C035A0664BFB29DA84D5
Part 16  - 7103CDC6DFF96911B6D1008C1331A1EF
Part 17  - 4D0D24480B0561345C1EDDC54DFD9A92
Part 18  - F976327463820686714D8F046F9ADE26

4/04/2018

Durametric vs PIWIS vs PST2: Which best?

I'm trying to decide which diagnostic tool to get.

Is the factory Porsche tool worth the price? I hear that you can do just as much and even more with a Windows computer and a cable. I've also heard about these $20 Chinese knock-offs like http://www.obdii365.com/wholesale/porsche-piwis-cable-free-shipping-617.html, but I've never actually seen one, so I wonder it they even exist.

In addition to diagnostics, I need the feature where you can disable things like the spoiler going up and down.

Let's put it this way:

PIWIS - There are no legitimate PIWIS units for sale, Porsche only leases them, starting at around $18K for the first year, and even at that has some features disabled. Most of the oriental knock-offs are not even remotely a PIWIS, but rather a clone of an old and no longer supported Durametric software system.

PSTII - Somewhat out of date, it cannot access systems on newer cars that did not exist when it was in use, and runs on a now dead operating system. Even at that, you will still lay out a couple grand to get an old computer with the system on it.

Durametric - Not as capable as the PIWIS, but one Hell of a lot cheaper at less than $300. Still under active development, updates come out regularly which add new features and correct bugs. Comes in two versions, the Enthusiast will only work with three VIN's and cannot do everything that the Pro version does (coding, activating systems), and the Pro version has no car numbers limitations, but at more than twice the price.

And as for the spoiler, you really don't need any of these, just disconnect the damned thing.

12/25/2017

How to code Porsche 997.1 steering wheel to 997.2's

Porsche 997.1 upgrade steering control module to 997.2 reference this article

997.1 upgrade to 997.2 steering wheel control module (997.613.289.01 or 997.613.299.01) need coding with PIWIS tester following this step:

1. Select "special functions" and do a "vehicle handover".

2. The "vehicle handover" runs automatically. When prompted if the car is new, select "no" and then confirm your chassis number (VIN). The "vehicle handover" is needed for recognizing your new steering wheel unit, so that all other control modules are able to communicate with it.

3. Select to "steering col. switch" unit and read and erase all fault memories. Then switch to "codings" and set "Automatic (Tiptronic/PDK)" and "PDK" (both!) to "installed". Also set all your other values to "installed" if the car is equipped with them (for example speed control system).

4. Then select "PSM" unit and read and erase all fault memories. After that read your security code (The security code is read with the PIWIS2
under menu item "Actual values") and do a steering-wheel-sensor-calibration (security code is needed here). (some cars need this calibration clear PSM faults)

5. At last: Erase all fault memories and then have fun while driving a Tiptronic car with PDK-Paddles

www.obdii365.com

How to Update Porsche sport design steering wheel to multifunction

Original with sport design steering wheel car upgrade multifunction steering wheel,need coding the vehicle steering control module from sport style wheel to multifunction, input"Multifunction enable code" and coding the car by porsche PIWIS tester diagnostic tool.

Following this step:

1.Connect PIWIS,Press F7 or select "Add Menu".