12/28/2015

4 Steps to update Porsche PIWIS Tester 2 firmware online

Here is the Porsche PIWIS Tester II diagnostic& programming system driver & firmware update instruction by obdii365 technician.

Pre-upgrade caution:
  1. Make sure your PC get well network connection
  2. Ensure the Porsche Tester scanner is connected with PC/laptop (do not need to connect with vehicle)
1) Open Porsche PIWIS software, select “Tools” function, click “Device update”
porsche-piwis-tester-firmware-update-1
2) Then click “Update” to update Piwis tester driver and firmware
porsche-piwis-tester-firmware-update-2
3) VCX Device Firmware Updating. Do not interrupt!!!
porsche-piwis-tester-firmware-update-3
4) Update Online Complete. Close the piwis software program.
porsche-piwis-tester-firmware-update-4

12/17/2015

How to enable Porsche PIWIS Tester 2 Developer Mode

Developer mode is a special Piwis 2 software that allow a lot of advanced coding normally reserved only to Factory.
With this function you will have a tool that can do more than software of official Porsche Dealer.
For example, you can reprogram all ECUs completely offline.
Note: Porsche PIWIS Tester 2 Developer Mode only available in German Language
How to use Developer Mode? OBD365 offer instruction here.
Install winrar and winhex on your computer.
-1-locate the file c:\program files\porsche\PIDT_P_MIG_DLSS3\pidt\plugins\de.dsa.pidt.datatype.jar and copy it on your desktop in order to modify it.
Open it with winrar,in the wirar windows locate the file
\de\dsa\pidt\datatypes\utils\Helper$1.class and drag it on your destop , delete it from the archive after the copy, keep the winrar window open.
Open Helper$1.class on your desktop with winhex and goto offset E81, replace 9A by A7 and save.
Drag back the save file on the winrar windows still open and click OK.Close winrar
Copy the new file de.dsa.pidt.datatype.jar you just made in
c:\program files\porsche\PIDT_P_MIG_DLSS3\pidt\plugins, overwrite it.
copy the file aftersales.sig on your desktop and rename it development.sig.Copy this file back in the folder
Do exactly the same method given above with the folder c:\program files\porsche\PIDT_P_MIG_DLSS3 with its own files.
To transform it in developer :
Settings
Diagnostic configuration
981-991, mode, operating mode, E= development, P= production, V= aftersales ( regular piwis)
Other models line, mode, operating mode, E= development, P= production, V= aftersales ( regular piwis)
This method to switch between regular and developer works only with my backup and will not work anymore after
an update.
Piwis 2 V16.2 Developer mode display:
Note: piwis tester ii 16.2 tested ok and will be released in the near future at obd365.




PIWIS Tester II code Rear-end electronics on Cayenne 92A MY2011

Here is the instruction on coding Rear-end electronics on Cayenne 92A MY2011 by PIWIS Tester 2 diagnostic system.

Tools needed:
Porsche PIWIS Tester2 (clone also okay)
Laptop Panasonic CF30 (better)
piwis-tester-2
Operation system:
Window XP

How to code Rear-end electronics on Cayenne 92A MY2011:
Select DIAGNOSTICS>>Cayenne>> 92A from MY2011
PIWIS-Tester-II-code-rear-end-electronics(1)

PIWIS-Tester-II-code-rear-end-electronics (3)

Select Rear-end electronics to continue.
PIWIS-Tester-II-code-rear-end-electronics (4)

PIWIS-Tester-II-code-rear-end-electronics (5)
Select Fault memory
PIWIS-Tester-II-code-rear-end-electronics (6)
Select Codings adaptions
PIWIS-Tester-II-code-rear-end-electronics (7)
Select Automatic coding
PIWIS-Tester-II-code-rear-end-electronics (8)
Coding success.
PIWIS-Tester-II-code-rear-end-electronics (9)
Done!!

To learn more about Porsche diagnosis or programming, please visit Piwis Tester.

12/16/2015

Porsche PIWIS Tester 2 software update to V16.2

Porsche PIWIS TESTER 2 new software v16.2 at obdii365 has been tested. PIWIS V16.2 works fine and will be released soon(Dec. 2015) .
PIWIS-Tester-II-V16.200 Update (1)
Software Version: V16.200
Operation system: Windows XP only
Update via HDD
Supported multi-Language: Russian/ English/ French/ Spanish/ Italian/ German/ Portuguese/ Japanese/ Chinese/ Dutch

PIWIS Tester2 V16.200 screen shots.
The new Porsche WDS system update to V1.4.0
PIWIS-Tester-II-V16.200 Update (10)PIWIS-Tester-II-V16.200 Update (11)PIWIS-Tester-II-V16.200 Update (12)
Porsche PIWIS  v16.2 update instruction:
  1. Please insert the PIWIS 2 16.200 DVD into DVD rom, then choose [Tools- DVD Upgrade] the software will install automatically.
PIWIS-Tester-II-V16.200 Update (2)
  1. Choose [Yes].
PIWIS-Tester-II-V16.200 Update (3)
  1. Click [OK] to update.
PIWIS-Tester-II-V16.200 Update (4)
  1. Wait patiently for around 4-7 hours (for me it costs 6:42 hours to install, viaCF-30 laptop CPU: 9300 4GB RAM) to finish update.
PIWIS-Tester-II-V16.200 Update (5)PIWIS-Tester-II-V16.200 Update (6)PIWIS-Tester-II-V16.200 Update (7)
  1. Porsche PIWIS Tester v16.2 update success, and restart the laptop.
PIWIS-Tester-II-V16.200 Update (8)PIWIS-Tester-II-V16.200 Update (9)
If the laptop not restart automatically, you must manual restart it, after restart, the software screen will change to PIWIS Tester II V16.200.

12/13/2015

Allscanner VCX-PLUS Multi Scanner vs. Porsche PIWIS Tester Ⅱ

Allscanner VCX-PLUS Multi Scanner has become the talk of the Internet in recent days. Still many customers confuse about VCX-PLUS and Porsche Piwis Ⅱ. What is the difference between Allscanner VCX-PLUS and Porsche Piwis Tester Ⅱ?
Allscanner VCX-PLUS Multi Scanner
Allscanner VCX-PLUS Multi Scanner
Porsche Piwis Tester ii
Porsche Piwis Tester ii
1)Hardware
Allscanner VCX-PLUS is one of the Allscanner products, the hardware is developed by Allscanner. Porsche PiwisⅡis a copy of the original version.

2) Software
VCX-PLUS and Piwis Ⅱ share the same latest V14.00 Porsche software which indicates   they share the same language availability: German, British English, American English, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese, and Dutch.  But VCX-PLUS scanner is also compatible with newest V139 JLR software. Both the software are preinstalled, no need to install the software again.

3) Function
Porsche Piwis Ⅱ supports basic diagnostic and key programming. If you need do online programming, the cost is 220USD/time. It also supports Bluetooth, GPS and Navigation Function. But you need to pay for the authorization of them.
VCX-PLUS supports basic diagnostic and Online Programming, which cost 220usd each time. It can also support 2005 Up Jaguar and Land Rover reprogramming.

4) Computer
Their software should be worked on different Windows XP laptops. PIWIS Ⅱ comes with send-hand Panasonic CF30 laptop while VCX-PLUS comes with Lenovo or Dell CF30 laptop.
Note: Your computer should meet CF30 or CF31 type when using these two products.

5) Update
PIWIS Ⅱsupports by CD or HDD (One Year for Free, 200USD for one time update after one year. It can not be updated online. ) VCX-PLUS should be updated via Hard disk.

6) Vehicle Coverage
PIWIS Ⅱworks on newer Porsche models. Porsche VCX-PLUS works on new Porsche cars up to MY 2013 and support reprogramming for Jaguar 2005 & up, Land Rover 2005 & up. If you need to work old Porsche models, YANHUA brand Porsche PIWIS is better. 

7) System Available
Both PIWIS Ⅱand VCX-PLUS are able to access following systems: ENGINE, transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System, KEYLESS GO system, OBDII system.

In conclusion:
Porsche PIWIS Ⅱ and VCX-PLUS Porsche software function the same but VCX-PLUS supports additional JLR software. New Panamera can only be diagnosed by using Porsche Piwis II.

Free Porsche PIWIS Tester II 2 V15.1 software and installation

Porsche PIWIS Tester II OEM diagnostic system has newly updated to V15.100 supporting diagnostic, Key Programming, Bluetooth and GPS navigation etc for Porsche vehicles till 2015. Here is the free software download and update instruction.

Porsche Piwis Tester II V15.100 Software Free Download:
http://cnc.qclt.com/porsche/piwis2-update-DVD/v15.100/
Download full 9 parts in the link and run software to run an update.
Language:
Russian/ English/ French/ Spanish/ Italian/ German/ Portuguese/ Japanese/ Chinese/ Dutch
Operating system:
Panasonic CF-30 laptop Win XP O/S (No need Installation)

How to update PIWIS tester 2 to V15.1?
1. Download update software DVD listed above;
2. Select “Tool- DVD Update” and the software will be installed automatically;
3. Click Yes to confirm released DVD installation prompt;
Porsche PIWIS Tester 2 V15.1 software and installation
4. Select OK to perform setup
Porsche PIWIS Tester 2 V15.1 software and installation
5. When see the following screen, wait until the whole upgrade process is ok (it might cost around 4 to 7 hours).
Porsche PIWIS Tester 2 V15.1 software and installation
6. Open the software after computer reboot, check the Porsche PIWIS V15.100 software information.
Porsche PIWIS Tester 2 V15.1 software and installation
Porsche PIWIS Tester 2 V15.1 software and installation
CF30 Laptop Plus Piwis Tester II 14.000 Software HDD For Porsche

How to update Porsche PIWIS Tester 2 software to V15.600

Porsche PIWIS Tester II diagnostic software has newly updated to V15.600. Here is the detail software upgrade instruction provided.
Software version: PIWIS V15.600
update Porsche PIWIS Tester 2 software to V15.600
The new software can be worked with Porsche PIWIS Tester 2, Allscanner VCX Porsche piwis testerYANHUA Porsche tester 2VXDIAG MULTI Diagnostic Tool for Porsche and LandRover etc.
Operating system:
Windows XP only (CF-30 laptop CPU: 9300 4GB RAM is recommended)
How to update Porsche PIWIS software to V15.600?
1. Please insert the upgrade DVD into DVD rom, then choose [Tools- DVD Upgrade] the software will install automatically.
2. Click [Yes] to confirm released DVD installation prompt;
update Porsche PIWIS Tester 2 software to V15.600
3. Click [OK] to confirm the setup.
update Porsche PIWIS Tester 2 software to V15.600
4. When you seen these screens, you need wait with patient, it might cost around 4-7 hours to finish the whole upgrade process.
update Porsche PIWIS Tester 2 software to V15.600
update Porsche PIWIS Tester 2 software to V15.600 update Porsche PIWIS Tester 2 software to V15.600
5. Open the software after computer reboot, check the Porsche Tester 2 V15.600 software information.
update Porsche PIWIS Tester 2 software to V15.600

update Porsche PIWIS Tester 2 software to V15.600
update Porsche PIWIS Tester 2 software to V15.600

Free download V15.9 Porsche PIWIS Tester 2 software

Porsche PIWIS Tester II diagnostic system software is newly upgraded to V15.9 (V15.900). New PIWIS software can be free downloaded here

(Download the software and burn a DVD disc to get the update)

Software version: V15.900
Operating system: Windows XP
Language: Russian/ English/ French/ Spanish/ Italian/ German/ Portuguese/ Japanese/ Chinese/ Dutch
Best quality Porsche Piwis Tester PCB display
porsche-piwis-tester-2

Compatible laptop:
Panasonic CF30 & CF31, which better?
There are two populous laptops to choose for both diagnosis and programming: Panasonic CF30 and Panasonic CF31. People get confused sometimes. Actually, besides those technical parameters, it’s very easy to make your decision between these two laptops:
1. Normally, people offers second-hand CF30 and CF31, but CF31 is always much more newer than CF30, it might because of CF30 is no more in production;
2. If you are a computer fun, and you always seek for higher configurations, then you should choose CF31, because it is 2 times faster than CF30;
3. But if you just need a specialized laptop for Porsche diagnosis, it’s definitely okay to get a second-hand CF30. PIWIS factory tested yes with Porsche software on CF30 laptop.

What’s new in software PIWIS II V15.900?
-wireless working now possible through WLAN connection to vehicle interface and to network by way of router
-very robust design (resistant to splash water and impacts)
-more comfortable to work with through high-performance processor (no long waiting period)
-integrated keyboard
-diagnostic scopes for Porsche Panamera
-simultaneous communication with several control units possible
-docking station with flexible mounting capability
porsche-piwis-tester-1
Porsche PIWIS Tester II 15.9 software display:
porsche-piwis-tester-2porsche-piwis-tester-3
-general information
porsche-piwis-tester-4
-diagnosis
porsche-piwis-tester-5porsche-piwis-tester-6
-new piwis tester 2 Wiring diagram system:
porsche-piwis-tester-7porsche-piwis-tester-8

Porsche PIWIS function:
PIWIS Tester ii can help to read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram, for ENGINE automatio transmission, air-conditioner, SRS, ABS, ASR, MPL, GM, Original antitheft System,KEYLESS GO system, OBDII system.

Vehicle tested successfully?
Yes. Obdii365 technicians has tested PIWIS  on the following models:
  1. 911(997) (991)
  2. Boxster/Cayman (987)
  3. Cayenne MY 2011 (it’s ok for Cayenne up to MY 2010)
  4. Panamera
    5. Most 2013 Porsche car models tested YES.